EPON OLT:4/ 8 /16port ,FWE-OLT5600T,maximum EPON optical fiber interfaces reach up to 16.
  • FW-OLT5616.JPG

  • FWE-OLT5600T is a miniaturization and modularization GEPON OLT, broadband fiber access system platform, developed by FULLWELL. It is fully compliant to IEEE802.3-2005 and Chinese technical requirements of Ethernet Passive Optical Network (EPON). This product supports integrated access service, such as broadband surf-netting, IP voice, IPTV, CATV and etc.

    With Twin-star bus 10Gigabit core switch backplane, support non-blocking wire-speed switch, support 1.25G EPON optical fiber access.
    1U height, adopt full front-wiring, small size, high capacity, maximum EPON optical fiber interfaces reach up to 16.
    Provide single main control module, single uplink module, single power supply module and 4 service interface modules.
    Support AC/DC dual power supply, with backup power charger and alarm device, support connecting external storage battery directly to do backup power charging protection.
    Support flexible controllable multi-cast, IGMP Proxy/Snooping and etc..
    Support strong VLAN extension functions, including VLAN Stacking/Trunk/Translation, etc.
    Support flexible DBA, uplink/downlink service rate-limited, precision up to 0.2% (Standard requirement<5%)
    Adopt multi LLID and IEEE802.1p technologies, provide multi protection QoS service..


    Equipment Components


    Full load Qty


    Equipment frame


    OLT equipment frame, including 10Gigabit core switch backplane

    Main control module 


    Hot-swappable module, integrate 1 FE out of band management port, 1 debugging serial port, 10Gigabit class non-blocking switch)

    EPON interface module


    Hot-swappable 4 EPON interfaces modules, compliant with IEEE802.3-2005 EPON technical standard, support 20km transmission distance (Standard configuration without optical module)

    Uplink interface module


    Hot-swappable 4 GE interfaces module, SFP slot, support 4GE+10GE XFP(Standard configuration without optical module)

    Fans module


    Hot-swappable fans module

    Power module


    Hot-swappable power supply module supports 220VAC/48VDC (With UPS charger). Builds dual power redundant hot backup with dual power supply

    Hardware features

    Equipment parameters



    Net weight


    Power consumption


    Operating condition

    Temperature:0 ~ +55, humidity:10 ~ 90% (non-condensed)

    Storing condition

    Temperature:-25 ~ +70, humidity:10 ~ 90% (non-condensed)

    Power supply


    36 ~ 75 VDC


    176 ~ 264 VAC

    Equipment interface

    Uplink Ethernet interface

    1*10GE(XFP connector), 4*GE interfaces (GE or SFP connectors)

    EPON interface

    16*EPON SFP interfaces

    Console debugging interface

    1 interface, compliant with RS232 technical standard

    Out-of-band management interface

    1 interface, compliant with 100Base-TX technical standard

    Monitor and alarm interface

    1 interface, compliant with RS485 technical standard (Support sub-node monitor )

    Advanced feature

    Switch function

    10Gigabit switch backplane (Switch capability reach up to 60Gbps), non-blocking wire-speed switch ability
    16K MAC address table, support 2K multicast table, support 4K VLAN (802.1Q)
    Up to 1*10GE, 4* uplink GE aggregation (IEEE 802.ad), support maximum 5 aggregation groups, support port mirroring based on output interface


    Support IEEE 802.1Q VLAN, support 4K concurrent VLAN 
    Strong VLAN extension functions, support VLAN Stacking/Trunk/Translation and flexible QinQ, etc


    Support STP, RSTP


    Support IGMPv1/v2 protocol, support IGMP Snooping/Proxy, support controllable multicast

    QoS and ACL

    Support CAR(Committed Access Rate), flow rate limit granularity is 64Kbps,
    Support priority level remarking based on port ID, MAC address, VLAN, 802.1p, DiffServ and/or IP ToS priority
    Support flexible queue scheduling algorithm, support port-based and queue-based configuration simultaneously, support three queue dispatch strategies, such as SP(Strict Priority),WRR(Weighted Round Robin) and hybrid mode(SP+WRR)
    Provide illegal frame filter and packet filter that based on sources MAC(Media Access Control)address, sources IP address, destination IP address, port, etc.
     Support QoS Profile management, allow user draw up QoS service plan

    Broadcast storm suppression

    Support broadcast, multicast and DLF broadcast storm suppression, suppression based on setting PPS

    Flow control

    Support IEEE 802.3x flow control in Full duplex mode, support backpressure flow control in half duplex mode

    Encryption and security

    Support LLID MAC address bundling, control the registration of ONU. Prevent illegal ONU deceive 
    Support ONU inter-separation control within same EPON network
     Support encrypted start to control configuration

    Link test

    Support EPON network link diagnosis byPingand Link test

    Configuration recovery

    Support ONU off line configuration, auto-configuration when registered


    FTP, Telnet, Console 
    Support in/out-of-band management, support SNMPv1/v2, support IEEE802.3ah OAM

    Management function

    Support equipment configuration management, performance management, fault management, sources management, safety management and etc. 
    Support ONU remote management, remote mass configuration download, software remote auto-update
    Support ONU offline configuration, auto-configuration when registered
    Support ONU line diagnosis and distance measuring

    Redundant backup

    Support AC/DC dual power protection


    FWE-OLT5600T Series

    FWE-OLT5604T,  4port EPON OLT

    FWE-OLT5608T,  8port EPON OLT

    FWE-OLT5610T, 10port EPON OLT

    FWE-OLT5616T, 16port EPON OLT

    copyright© Hangzhou Fullwell Optoelectronic Equipment Co., Ltd.   ICP registration: No.07029042